Smooth Fitness EVO 1 Power Treadmill - Save 25%

Shipping Included

The new EVO 1 treadmill packs all the most important features you could ever want in a motorized treadmill into a very simple and user-friendly package.

It comes standard with Wireless Heart Rate Control, Motion Control and Swing Arm Shock Absorption Cushioning. A system designed to reduce the impact on your joints.

Features

Large 20" x 54" treadbelt

Powerful 2.75 continuous horsepower motor

Wireless heart-rate control which includes the belt and transmitter

Handrail grip pulse monitor

Patented Motion Control - adjust speed with the simple wave of your hands

Swing Arm frame cushioning system for reduced impact and maximum protection of your joints.

New extra large 3" LED console displays speed, distance, time, pace, calories burned, pulse rate - See detailed description

6" straddle pads for easily getting on and off the treadmill

Easy to read 1/4 mile track display with progress report

Non-slip larger rollers extends the life of the belt, deck and roller bearings.

Easy to clean two-ply, non-slip whisper weave belt.

Accessory rack with dual water bottle holders and CD tray

Solid 265 lb weight - provides extra stability

Minimal assembly required

2.75 HP Continuous Duty Motor - Continuous duty horsepower ratings are the amount of power a motor will produce "continuously" at a given RPM (revolutions per minute). Continuous duty HP is the "working power" of a treadmill motor, providing constant power to the drive belt. Our motors are built for endurance and reliability and are backed with an industry leading Lifetime warranty.

Pulse Width Modulation (PWM Circuit Board) - PWM is a new electronics technology that will soon be found on most premium treadmills. PWM control boards came out in treadmill applications in the mid-90's. This new technology provides the following advantages:

1. SILENT - Because the DC voltage is much more "pure," PWM circuit boards do not require a choke and capacitor to filter out electrical "hum." With the electrical "hum" practically eliminated, the treadmill is dramatically more quiet than a treadmill with a SCR board.

2. PURE VOLTAGE, MORE POWER - Both PWM and SCR control boards take AC power (alternating current) and "rectify" it into DC (direct current) voltage. AC voltage is a constant change of positive/negative current 60 times a second. That's where we get the term "60 cycle." In other words, the current is "chopped" 60 times per second. PWM (Pulse Width Modulation) boards will "chop" it 1200 times per second, or 20 times faster with pure DC voltage. Because of the "pure" DC voltage, the motor is "seeing" stronger current. The result is higher "pure" voltage with less amp draw.

3. LOW AMP DRAW - PWM allows much more tolerance to heavy weight users due to a lower amp draw. Amp draw is what throws a breaker in your home when too much energy is demanded.

4. LOWER COST - PWM circuit boards are expensive to produce. But the real savings comes from NOT purchasing a choke and capacitor, as well as a larger flywheel. 5. SMALLER FLYWHEEL - Since the motor is receiving and outputting more pure energy, it does not have to rely on a large flywheel to keep the treadbelt moving. Smaller flywheels can be utilized.

6. ONE LOWER CIRCUIT BOARDS - Smooth Fitness has designed a unique lower circuit board that is much smaller and more reliable than any other on the market today. All circuits and diodes are enclosed in a steel casing preventing dust and dirt as well as heat from causing a failure. We use this lower board on every EVO treadmill we manufacture, which will facilitate service over the years.

Frame - Smooth Fitness Uni-Weld frame is used by many of the top treadmill manufacturers, including Life Fitness, Precor, and Trotter, and of course, Smooth Fitness.

WELDED vs. BOLTED FRAMES

In a bolted frame, the size/diameter of the holes that need to be drilled on the frame are always larger than the diameter of the bolt. This leaves room for movement, especially over a long period of treadmill usage, and leads to frame fatigue and failure.

STEEL vs. ALUMINUM FRAMES

Steel is a typically less expensive than the extruded aluminum used in some competitor frames. Aluminum is more expensive, and costs more to weld. It is very rare for either a steel or aluminum frame to fail, and most manufacturer's have never replaced a frame under warranty.

Elevation - Elevation mechanisms come in many different forms. The most effective and durable elevation assemblies are worm-gear actuator driven electronic elevation motors.

Worm-gear electronic elevation systems use a separate, powerful motor to elevate the treadmill while in use. Typical elevation motors will have a thrust value from 400 to 1000 pounds, therefore pushing up the deck without any hesitation while exercising.

Most manufacturers mount their actuators backwards, in essence pushing up the deck, which is exactly the opposite of what an actuator is designed to do. All of our EVO treadmills feature a patented actuator elevation system, which pulls the treadmill up. Therefore, our machines have approximately 2000 lbs. of pulling capacity, which is why they operate so quietly. They will last forever!

Rollers - 2.5" diameter rollers with a rust resistant steel finish and high quality Japanese bearings press sealed into each end. Hardened,1.9" Carbon steel wall construction. The longer length on the tube places LESS stress on the bearing, extending the life. Only EVO treadmills have rubber sleeves on both the front and rear roller, which allow for less tightening of the treadbelt, and thus much longer wear on the belt, deck and roller bearing.

Belt - 2-Ply, 100% Polyester low friction sole backing with Black PVC non-slip beam top. Black PVC (poly vinyl chloride) is the industry standard for all treadmill belts. High wear and tensile strength help keep this belt a top performer for several years. The 100% Polyester backing is "whisper weaved" for very low friction, and thus a very quiet belt in use.

EVO treadbelts are unique in that we use a proprietary, non-slip tread pattern, which does not TRAP dirt into the square grooves that an ordinary treadbelt would have. Easy to clean and more durable, our treadbelts have a higher quality look and feel.

The 20-degree seamless diagonally fused belt is incorporated to help reduce noise. A belt with a perpendicular or straight across splice causes excessive noise when the belt crosses over the rollers on each end, creating a "thumping" noise.

This is the highest quality 2 ply belt in the industry. The belt is pre-lubricated with silicon and will not need additional lubricating at delivery.

Benefits:

High tensile strength - nylon fiber has high tensile strength per inch, this makes it 5 times stronger than cotton belts.

High impact resistance - Nylon conveyor belt displays superiority resistance against impact and material trapping because of its ample elasticity.

Advanced resistance to water, acid and alkali

Less bending fatigue and flexiblity to adopt to smaller diameter pulley

Improved adhesion and less ply separation

Durability against low temperature

Superior durability

Lighter weight enables application of less motor power. The less effort placed on your motor will result

Deck - 1" Thick, high-compression pressboard made out of particulate and fibered Douglas Fir wood. The laminate black top, also known as a phenolic deck coating, is a micro-screen, lubricate trapping laminate. Phenolic decks have a micro-screen that acts as a net for the silicon lubricant, thus making the silicon "catch" within the "micro-valleys" that are created by the micro-screen. Our decks are reversible and laminated with wax on both ends.

CLEANING - Cleaning the top layer can be done by using a light cleaner, such as glass cleaner. DO NOT USE any chloride based cleaners such as bleach. CLEANING the underside of the belt should be done by loosening the rear roller and wiping the deck and the back of the belt (the polyester side) with a clean towel ONLY, WITH NO CLEANERS. After cleaning, re-apply new deck lubricant to the deck and adjust.

Optical Speed Sensor - An Optical Speed Sensor is used in combination with the PWM motor controller to produce the smoothest speed changes. The optical eye actually counts the revolutions of the motor directly at the axle. The PWM motor controller then averages the input count from the optical eye to produce a consistent speed regardless of load.

Warranty - Lifetime on all parts, 1 Year Labor